• 1/3

Steel Anchor Extruding Machine

GYJ-type extruder for steel strand in the production of anchor head, extrusion-type anchor is a professional tool.
Send Inquiry
Description

GYJ-type extruder for steel strand in the production of anchor head, extrusion-type anchor is a professional tool.

(Note : GYJ-B extruder can only squeeze the extrusion sleeve at the end of the steel strand; GYJ-C type through-type extruder can squeeze the extrusion sleeve in any part of the strand.)


Product Parameter

Technical performance:

GYJ-C Extruder

Nom.Oil pressure

Nom.Extrusion force

Extrusion area of piston

Return area of piston

Stroke of extrusion

Weight

Overall size

Passing through the hole

MPa

KN

m2

m2

mm

kg

mm

mm

52

494

9.5×10-3

5.1×10-3

120

48

Φ148×510

Φ30


Product feature and application

image007


Production detail

image009(001)

On the working, to the cylinder for high pressure oil, the piston drive the top pressure head will squeeze the sleeve, squeeze the spring and the strand together into the extrusion die cone hole, the small diameter of the die hole is smaller than the outer diameter of the extrusion sleeve size, So that the extrusion sleeve firmly compressed on the strand, squeeze the spring inside the sharp edge of the stranded strand, the outer edge of the embedded extrusion sleeve, made a anchorage performance with very reliable extrusion type anchor.


Use the method

Before the extrusion check

(1) Connected to the device, and then start the pump, so that the extruder piston no-load operation 2-3 times, no problem, can be squeezed.

(2) Extrusion of the steel strand in the cut off, the section neat, not skew.

(3) Check the steel wire、 squeeze spring、extrusion sleeve、 extrusion die、 the top pressure head is supporting.

(4) The outer surface of the extrusion sleeve is coated with anti-rust oil and lubricated when squeezed. If the surface of the soil, gray sand, must be cleaned and then used, or easy to damage the extrusion die.

(5) The oil pump relief valve (or safety valve) to adjust the maximum working pressure of 52MPa.

(6) Check the oil pump and extruder tubing connection is correct, when connecting the tubing, the joints must be clean and then clean the dirty.


Product qualification

image011(001)

image013(001)


Deliver,shipping and serving

image015(001)


Serving

Our customers face the world, welcome to choose Lingqiao

image017(001)

image019(001)


Why Choose Us !!!

We,Lingqiao , has a strong technical force,.with a number of years engaged in prestressing anchorage machine design, manufacturing and maintenance and construction of professional and technical personnel.We are also a big family, unity and friendship, work together, grow up together, do a good job of our Lingqiao prestressed export quality brand.Lingqiao is the best choice !!!


Certificate

image023(001)

image025(001)

image027(001)

image029(001)


FAQ

image031(001)